Public Notice Information
Air
0
Airlite Plastics on behalf of Omaha Air Quality
Omaha
Omaha

May be slow to load depending on the number of documents
Operating
November 8, 2018
December 7, 2018

CITY of OMAHA
AIR QUALITY CONTROL
Notice is given to the public according to Chapter 41 of the Omaha Municipal Code of the application of Airlite Plastics for a renewal to their air emission operating permit for the EPS shape molding manufacturing plant at 525 Kansas Ave, Omaha. The potential emissions at this facility in tons will be: TSP 0.7, PM10 0.7, PM2.5 0.7, SOx 0.1, NOx 9.2, VOC 244.7 and CO 7.7.
No significant impact on air quality is expected from the operation of this facility. Douglas County is in attainment with air quality standards for the listed pollutants. Approval is recommended with the condition that any pollution control equipment that may be necessary for compliance with the City of Omaha or Nebraska Air Pollution Control Rules and Regulations will be installed within 180 days after notification by the City of noncompliance.
All information submitted by the applicant and the proposed approval by Air Quality Control are available for inspection by the public at the office of Omaha Air Quality Control from November 7, 2018 to December 7, 2018. Comments received during that period will be considered. During that period the applicant, or any interested person or group of persons, may request or petition the Control Officer for a public hearing, and state the nature of the issues to be raised and all arguments and factual grounds supporting their position. The Control Officer may hold a public hearing if the comments, requests, or petitions raise legal, policy or discretionary questions and significant public interest exists with respect to the application. Comments should be mailed to:
John Finlan Mayne
Public Works
Air Quality Control
5600 S. 10th Street
Omaha, NE 68107

https://publicworks.cityofomaha.org/images/air_quality/Airlite.2018renewal.noticeforweb.pdf